
S 310 OXYGEN SCAVENGER
DESCRIPTION
S 310 consists of sodium sulfite and specially selected catalyst to provide
an almost instantaneous oxygen removal even at low temperature. This product
will effectively prevent oxygen corrosion in boiler system.
GENERAL SPECIFICATION
Appearance ………….…………… White free flowing powder
SG at 28° ……………………….… 0.72
Solubility ………………………..… 20% at 75° F
pH of 1% solution ……………...…. 9.5 to 10.5
TREATMENT
Prepared as a 5% solution, it is recommended to feed to the preboiler section or direct to the boiler. Solution of catalysed sulfite must be covered with a float to minimise contact with air. The dosage of catalysed sulfite is regulated to maintain an excess of 30 ppm to 50 ppm of sulfite as SO3 in the boiler water.
HANDLING
Inhalation of dust should be avoided and the solution should not be taken internally.
PACKING S 310 is available in moisture proof 50-liter drum.
All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability of fitness for a particular purpose or representation, express or implied, for which seller assumes legal responsibility and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Date:28/11/96