Wastewater Treatment

Boiler Water Treatment

Cooling Water Treatment

Raw Water Treatment

Swimming Pool Chemicals

Specialty Chemicals

Operation & Maintenance

Cleaning Products

Industrial Chemicals

Test kits & Reagents

testing Laboratory

PRODUCT DATA
• TALLOCIDE 50 Environmentally Friendly Biocide

DESCRIPTION

TALLOCIDE 50 is an anti-microbial agent developed from the latest chemistry. It is specially formulated to provide a surface-active product that can clean and penetrate microbiologically-fouled surfaces. It is effective in controlling slime-forming bacteria and algae. TALLOCIDE 50 is a combination of surfactants with a water-soluble phase. The surfactants work in the product as an emulsifying agent in dissolving slime. The ease of handling and high potency of TALLOCIDE 50 makes it suitable for use in both closed and open recirculating cooling water systems. TALLOCIDE 50 anti-microbial activities are based on unique property and microbes would not be able to develop acquired immunity, therefore TALLOCIDE 50 can be used continuously without losing effectiveness.

GENERAL SPECIFICATION

Appearance……………………………. Milky white liquid
Odour………………………………… ..Pleasant aroma
Specific gravity …………………….….. ~ 1
Solubility………………………………. Soluble at application dosage
pH………………………………………. 7-8

ADVANTAGES

  • Non-hazardous to humans and enviroment
  • Kills algae, bacteria and removes slimy deposits
  • Effective over a broad pH and temperature range
  • Compatible with other water treatment additives
  • Biodegradable
  • Components and FDA approved
  • No adapting effect

TREATMENT

TALLOCIDE 50 can be dosed directly or pre-diluted with water. A dosage of 40 - 60 ppm in the system will provide effective control of algae and bacteria. For system cleaning a dosage of 500 ppm is recommended, a soaking time of 2 hours should be adequate. For optimum control , daily dosing is always recommended, otherwise weekly shock treatment at higher dosages should be carried out.

HANDLING

Avoid contact with liquid and inhalation of vapour. Wash with plenty of water in case of eyes or skin contact.
 
STORAGE

The product is susceptible to frost and should also be protected from direct sunlight. Under proper storage, the product shelf life is at least 6 months. A slight formation of layers can occur after long term storage; after homogenising the product, can be used without any loss of effectiveness.

PACKING TALLOCIDE 50 is available in 25 kg packing.













All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, expressed warranty or implied warranty of merchantability of fitness for a particular purpose or representation, expressed or implied, for which seller assumes legal responsibility and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Date 06/01/97

« Back
Copyright 2008 - ACCOT . All rights reserved.
Home | Introduction | Companies | Our Philosophy | Technical Team | Articles & News | Members Area | Enquiry/Order | Sitemaps