Accot Technologies Sdn. Bhd.
Tel: 60 3 5192 0833
Fax: 60 3 5192 0836
URL : http://www.accot.biz

DESCRIPTION & USE

Bak-Wira FW is a highly specialised combination of bacterial cultures specifically selected and adapted to degrade a wide range of organic waste. This product has been used successfully in palm oil refineries, soy bean refineries, dairy products, breweries, chemical plants, food and beverages processing plants and etc. It is proven to be effective to overcome a variety of problems such as periods of high influent loading, system start-up after mill shutdown, and unfavourable temperature conditions. This product is used to achieve consistent effluents with widely ranging influent organic levels, improve settleability of biological solids, reduces surcharges, correct low or inconsistent MLVSS numbers, control foam production from partially degraded organics and alter biomass dynamics gradually shifting towards a superior population

Bak-Wira FW is a live synergistic blend of all natural, Class 1 bacteria specifically chosen for their accelerated ability to degrade high level of fats, oil and grease, proteins, carbohydrates, lipids, BTEX, TPH, sulphur containing compounds, solvents and other organic compounds into carbon dioxide and water. This product can also prevent hydrogen sulphite production.

Bak-Wira FW contains facultative anaerobes which degrade with or without oxygen. Composed of several strains of bacteria which have been cultured for compatibility to feed on the same media and reproduce themselves to grow into adult form. These bacteria feed and reproduce while attacking the material in the water that causes pollution. Able to degrade in cold or hot conditions.

Bak-Wira FW are live micro-organism which must be seeded on a regular basis to maintain a high population of organisms and to prevent total kill when an upset in the treatment occurs.
 
 

PRODUCT SPECIFICATION

Form: Free flowing, tan coloured powder
Odour: Yeast like
Bulk density: 0.5 – 0.7 g/ml.
 
 

DIRECTIONS OF USE

Bacteria and enzymes in Bak-Wira FW perform well within a pH range of 5.5 to 8.5 with the optimum near pH 7.0. Toxic chemicals in waste water also adversely affect the survival of bacteria colonies. Temperature of the system should also be not more than 50 deg. C. Before application of Bak-Wira FW, the system should be controlled such that the correct balance of dissolved oxygen, nutrients, pH and temperature are present.

The dosage of Bak-Wira FW depends on the organic loading of the waste water. For BOD loading of 1000 PPM and below, the following table will provide an indication of dosages, the dosages are based on PPM.
 
 
 
 

Days from Startup	Flowrate  < 1000 M3/Day	Flowrate  > 1000 M3/Day
1st  & 2nd day	3 – 5	5 – 8
3rd & 4th day	2 – 4	4 – 6
5th – 15th day	1 – 3	2 – 4
16th – 30th day	0.7 – 2	1 – 3
Daily	0.3 – 0.7	0.5 – 1

 

 The preferred method of addition is to make a slurry of Bak-Wira FW with the waste water and aerate a few hours before use. Bak-Wira FW could also be added direct into the biological tank/pond.
 
 

TARGETED WASTE

* Digest Oil and Grease
* Digest B.T.E.X
* Digest Proteins
* Digest T.P.H
* Digest Carbohydrates
 

PRODUCT BENEFITS

* All Natural
* Reduces T.S.S
* Low Cost
* Reduces BOD
* Environmentally Safe
* Reduces COD
 
 

STORAGE AND HANDLING

Store in cool dry place. Avoid excessive inhalation
 
 

PACKING

12 kg plastic pails
 
 
 

All statement , information and data are believed to be accurate and reliable but are not taken as a guarantee.