
Bak-Wira MP 300
DESCRIPTION & USE
Bak-Wira MP 300 is a highly specialised combination of bacterial cultures specifically selected and adapted to degrade a wide range of organic wastes. It is proven to be effective to overcome a variety of problems such as periods of high influent loading, system start-up after mill shutdown, and unfavourable temperature conditions. This product is used to achieve consistent effluents with widely ranging influent organic levels, improve settleability of biological solids, reduces surcharges, correct low or inconsistent MLVSS numbers, control foam production from partially degraded organics and alter biomass dynamics gradually shifting towards a superior population.
Bak-Wira MP 300 is a live synergistic blend of all natural, Class 1 bacteria(mainly bacillus strains) and enzymes specifically chosen for their accelerated ability to degrade high level of bio-degradable contaminants , like sulphur containing compounds, solvents and other organic compounds into carbon dioxide and water. This product can also prevent hydrogen sulphide production.
Bak-Wira MP 300 contains facultative anaerobes which degrade with or without oxygen. Composed of several strains of bacteria which have been cultured for compatibility to feed on the same media and reproduce themselves to grow into adult form. These bacteria feed and reproduce while attacking the material in the water that causes pollution. Able to degrade in cold or hot conditions.
Bak-Wira MP 300 are live micro-organisms which must be seeded on a regular
basis to maintain a high population
of organisms and to prevent total kill when an upset in the treatment
occurs.
PRODUCT SPECIFICATION
Form: Free flowing, tan coloured powder
Odour: Yeast like
Bulk density: 0.5 – 0.7 g/ml.
Bacteria Count: Min. 5 billion/g ( Aerobic )
Min. 1 billion/g ( Anaerobic )
DIRECTIONS OF USE
Bacteria and enzymes in Bak-Wira MP 300 perform well within a pH range of 5.5 to 8.5 with the optimum near pH 7.0. Toxic chemicals in waste water also adversely affect the survival of bacteria colonies. Temperature of the system should also be not more than 50 deg. C. Before application of Bak-Wira MP 300, the system should be controlled such that the correct balance of dissolved oxygen, nutrients, pH and temperature are present.
The dosage of Bak-Wira MP 300 depends on the organic
loading of the waste water. For BOD loading of 1000 PPM and below, the
following table will provide an indication of dosages, the dosages are
based on PPM.
| Days from Startup | Flowrate
< 1000 M3/Day |
Flowrate
> 1000 M3/Day |
| 1st & 2nd day | 3 – 5 | 5 – 8 |
| 3rd & 4th day | 2 – 4 | 4 – 6 |
| 5th – 15th day | 1 – 3 | 2 – 4 |
| 16th – 30th day | 0.7 – 2 | 1 – 3 |
| Daily | 0.3 – 0.7 | 0.5 – 1 |
The preferred method of addition is to make a slurry of
Bak-Wira
MP 300 with the waste water and aerate a few hours before use. Bak-Wira
MP 300 could also be added direct into the biological tank/pond.
TARGETED APPLICATION
* Digest Oil and Grease-mineral, animal
* Digest toxic chemicals like phenol, chlorinated and
vegetable solvents etc
* Digest Proteins, Carbohydrates
* Foul odour control
* Foam control
* Algae control and Aquaculture application
PRODUCT BENEFITS
* All Natural
* Reduces T.S.S
* Low Cost
* Reduces BOD, COD
* Environmentally Safe
* Improve settleability of bacteria flocs
STORAGE AND HANDLING
Store in cool dry place. Avoid excessive inhalation
PACKING
11.3 kg(25 lb) plastic pails
All statement , information and data are believed to be accurate and reliable but are not taken as a guarantee, express warranty or implied warranty of merchantability of fitness for a particular purpose or representation, express or implied for which seller assumes legal responsibility and they are offered solely for your consideration, investigation and verification. Statements or suggestion concerning possible use of this product are made without representation or warranty that any such is free of patent infringement and not recommendations to infringe on any patent. Date: 10/02/2000